Some cars are more reliable than others but the fact remains that any car can break down at any time. And this is a result of different factors ranging from poor maintenance to just unforeseen happenings.
Cars have a lot of components and it’s easy to run into confusion in a situation where you try to start your car and it refuses to start. There are situations where your car would refuse to start but make a clicking sound. This is a lot easier to detect and fix but what do you do when the car won’t start and there’s no clicking?
We have prepared this piece of information to help you resolve this issue. We have listed all the possible reasons why your car won’t start and there’s no clicking sound and also, the different things you can do to fix this.

Table of contents
Reasons Why Your Car won’t Start and Yet No Clicking
There are quite a few reasons your car won’t start and won’t make a clicking sound but the most common ones are low battery, a dead alternator, and a bad starter.
If you have replaced all the necessary parts and cannot get your car to start, then it’s time to check the wiring. Make sure there are no loose wires on your engine block or anywhere else in your engine compartment. Here are more detailed reasons why your car doesn’t start and still gives no clicking:
1. Dead Battery
The first thing you should always check is the battery when your car doesn’t start. If the battery is dead or dying, there’s a good chance that it will not be able to provide enough power to start your car.
The first step to fixing a dead battery is to check the connections. Check that the cables are connected tightly to the posts on your battery, and then check that they’re still connected properly to the terminals on other parts of your vehicle. Once these are confirmed, you’ll need to get the battery tested to determine if it needs to be recharged or replaced.
2. Faulty Ignition Switch
A faulty ignition switch can be the reason your car won’t start and won’t click. The switch is responsible for the electrical system that engages when you turn the key, so if it’s faulty, it won’t work properly and may cause other problems.
Most modern vehicles have automatic keys that use radio frequency identification (RFID) technology to open doors and start engines without being inserted into a slot or turned manually.
If you have one of these keys and your engine won’t start, first check that there isn’t something blocking access by moving any objects away from it before turning the key again. To fix a faulty ignition switch, you may have to get an auto mechanic.
3. Clogged Fuel Filter
A clogged fuel filter can cause your car not to start. A fuel filter is a thin, plastic tube that catches dirt and rust particles in the gasoline before it’s pushed into your engine.
If this gets clogged up with sediment, it will block the gas flow and prevent your car from starting. If you have trouble getting your vehicle started and suspect that this may be the issue, take off the gas tank cap and look at the bottom. If there are tiny bits of debris on it, then you’ll need to replace your fuel filter!
Remove the gas cap and check for any debris. If there is debris, clean it out with a clean piece of cloth. Cleaning the gas cap will help prevent future problems with starting your vehicle.
4. Faulty Fuel Pump
The fuel pump moves gas through the engine and into your vehicle’s cylinders. It’s located in the fuel tank and powered by your battery. If your car doesn’t start, this critical equipment has likely gone wrong, which can cause major problems if left untreated.
You can buy a special fuel gauge from an auto parts store or online retailer. This gauge is designed specifically for testing fuel pumps, so it won’t damage them as other gauges might. (e.g., one meant for testing radiator coolant).
The gauge has two hoses attached – one that connects to your vehicle’s fuel line and one that connects directly to the fuel pump itself (this part is called a “test lead”). You’d have to follow the instruction on the gauge.
If your fuel pump is faulty, you may need to replace it. You can do so by removing the fuel tank and taking out the old pump. You will then install a new one and reconnect it to the tank. This will allow you to drive your vehicle again.
5. A Blown Fuse
A blown fuse could be the reason your car won’t start. Fuses are small devices that protect electrical equipment from being damaged by too much electricity.
If a fuse blows, it means there’s a problem somewhere in the circuit, and you should replace it with a new one before troubleshooting your ignition system.
Test the fuses by removing them from their holders and examining them for signs of wear or damage. If any are damaged, replace them with new ones before reinserting them into their holders and testing again.
6. The Steering Wheel is Locked
If your car won’t start and there’s no clicking, it could be a problem with the steering wheel locking system. If you try to turn the key but nothing happens, someone may have locked your steering wheel using a button or switch in the vehicle. In this case, you’d need to take your vehicle to a professional mechanic
7. Low fuel
If your fuel tank is running low, your car won’t start. Ensure your gas tank is full before starting the vehicle again. If this isn’t the issue and you still can’t get your car started, try taking out the key and starting it again after waiting a few minutes.
This will help reset some of the computer systems in your vehicle so they can be properly read again.
8. Connectors And Terminals Problem
These components help connect different parts within your vehicle together so that they can communicate properly with each other when needed.
If any part within this network becomes damaged, it will stop working properly, leading to problems when starting your engine.
The first step to fixing this problem is determining if your connector or terminal is loose or broken. If your connector or terminal is loose, you will need to tighten the screws holding it in place. If all your connectors are damaged, you may need to replace them with the help of a professional.
Read: Traction Control Light Comes on and Car Starts Jerking
Conclusion
If your car won’t start, no clicking, you may have a problem with the ignition system. The first thing to check is the battery. If your battery is good, could you check the connections from the battery to the starter solenoid and other electrical components in the engine bay? If any of these are disconnected or damaged, you’ll need to fix them before you can try starting your car again.

Ugo is a passionate car enthusiast with a Bachelor of Electrical and Electronics Engineering degree and hands-on experience in troubleshooting and fixing automobiles.
I combine my electrical and mechanical engineering knowledge with practical skills to address car-related issues.
My love for cars and dedication to educating others led to the creation of Fixandtroubleshoot.com!